|
• Interior and exterior
• Floors and walls
• Interior counter tops
• Exterior building facades
|

Absolute Black (Premium) - GR10A 12"x12", 18"x18"
 |

Aldeia - GR32 12"x12"
 |

Baltic Brown - GR62 12"x12"
 |

Bianco Catalina - GR01 12"x12"
 |

Blue Pearl - GR08 12"x12"
 |

Emerald Pearl - GR03 12"x12"
 |

Empress Gold - GR74 12"x12"
 |

Firenze - GR53 12"x12"
 |

Galaxy Black - GR10G 12"x12"
 |

Giallo Colonia - GR24 12"x12"
 |

Giallo Fiorito - GR05 12"x12"
 |

Giallo Ornamental - GR51 12"x12"
 |

Giallo Veneziano - GR60 12"x12"
 |

Golden Beach - GR46 12"x12"
 |

Kashmir Gold - GR13 12"x12"
 |

Labrador Antique - GR33 12"x12"
 |

Majestic Mauve - GR07 12"x12"
 |

New Venetian Gold - GR43 12"x12"
 |

Santa Cecilia - GR02 12"x12"
 |

Seafoam Green - GR71 12"x12"
 |

Tan Brown - GR19 12"x12"
 |

Tropical Brown - GR38 12"x12"
 |

Tropical Tan - GR49 12"x12"
 |

Ubatuba Green - GR96 12"x12"
 |

Verde Butterfly - GR40 12"x12"
 |
 Volga Blue – GR56 12"x12" Coming Soon |
|
 |
|

Galaxy Black 1/2" x 1/2" on 12" x 12" mesh
 |

New Venetian Gold 1/2" x 1/2" on 12" x 12" mesh
 |

Tropical Brown 1/2" x 1/2" on 12" x 12" mesh
 |

Ubatuba Green 1/2" x 1/2" on 12" x 12" mesh
 |
|

Absolute Black Premium Cigaro 1"x12"
 |

Absolute Black Premium OG 2"x12"
 |

Absolute Black Premium OG Corner 1"x2"
 |
 |

New Venetian Gold Cigaro 1"x12"
 |

New Venetian Gold OG 2"x12"
 |

New Venetian Gold OG Corner 1"x2"
 |
 |

Tropical Brown Cigaro 1"x12"
 |

Tropical Brown OG 2"x12"
 |

Tropical Brown OG Corner 1"x2"
 |
 |

Ubatuba Green Cigaro 1"x12"
 |

Ubatuba Green OG 2"x12"
 |

Ubatuba Green OG Corner 1"x2"
 |
 |
• Polished: During production, a facet is put on each crystal
at a microscopic level– much as a jeweler would facet a diamond.
The resulting smooth surface allows light to refract in and out
of the stone in a parallel way. This enhances the visible sheen
and gives the appearance of depth.
• Honed: A smooth, non-reflective finish achieved by using
acid to grind the surface (available by special order only).
• Flamed (thermal): A rough surface created by applying a
direct flame source, such as a blowtorch, and burning off portions
of the surface minerals.
• Color variations enhance the natural beauty of the stone.
Inspect multiple samples before selection to ensure satisfaction
with colors and patterns.
• Do clean with a dust mop and neutral cleaner to remove most
dirt.
• Do use a penetrating sealer to prevent staining. Because
many stones are porous to some degree, excessive water may cause
reactions such as oxidation (rust), spalling, deterioration of dry
veins, etc. “Special Impregnating” sealers are recommended
to avoid these problems. Emser representatives can recommend appropriate
sealers.
• Do clean natural stones with “special stone cleaners”,
“pH balanced cleaners” or “neutral base cleaners.”
• Do not clean any natural stone with acidic cleaners, including
(but not limited to) vinegar or cleaners with “lemon”
or “lime” on the label. These products will abrade the
polish from the stone. Sealers DO NOT protect polished surfaces
from these types of cleaners.
|